Spark 300 Amp Car Battery Booster Starter Jumper Cable Lead Wire (2.7 + 2.7 M)

Product Code: Spark300AmpCarBatteryBoosterStarterJumperCableLeadWire(2.7+2.7M)298

Quantity :

  • Availability : in stock
  • 799
  • 2999
  • You saving : 2200
Colour :

About this item

300 Amp Car Battery Booster Starter Jumper Cable Lead Wire (2.7 + 2.7 M) Delhi Eretail 300 Amp Battery Charging Jumper Cable/ Leads 300 Amp Jumper Cables 10 Gauges For Extra Strength To Jump Your Car When You Really Need. A Must Have For Any Car Truck In Case Of A Dead Battery! The Booster Cables Are Insulated With T-prene Coating, Which Is Designed To Remain Flexible Down To -94 Degrees Fahrenheit. The 4-gauge, Heavy-duty Cables Are The Strongest Consumer Grade Available, And They Resist Motor Oil, Rain, And Chemicals For Dependable Use. How To Use: 1. Position Another Car Near Yours So That The Batteries Are Close, But Do Not Let The Vehicles Touch. Switch Off The Ignition And All Electrical Equipment On Both Vehicles, Apply The Handbrakes, And Ensure That The Gears Are In Neutral (manual Transmission Vehicles) Or ?p? For Automatics. Open The Bonnets. 2. Connect One End Of The Red Jump Lead To The Positive (+) Terminal Of The Flat Battery ? Do Not Let The Other End Of The Red Lead Touch Any Vehicle Metal ? And Connect The Other End Of The Red Lead To The Positive (+) Terminal Of The Boosting Battery. 3. Connect One End Of The Black Jump Lead To The Negative (-) Terminal Of The Boosting Battery And Connect The Other End Of The Black Lead To A Bolt Or Metal Bracket, Well Away From The Battery, On The Engine Block Of The Vehicle To Be Started. 4. Ensure That The Jump Leads Cannot Come Into Contact With Any Moving Parts Of Either Engine. Start The Engine Of The Boosting Vehicle And Run It At A Fast Idle Speed. Now Start The Engine Of Your Vehicle And Check That It Is Running Properly. 5. Stop The Engine Of The Boosting Vehicle Only. Switch On The Lights, The Heated Rear Window And The Heater Blower Motor On Your Vehicle - This Is To Prevent Any Voltage Surges. Disconnect The Jump Leads In The Reverse Order Of Connection, Then Switch Off The Lights Etc. Close The Bonnets. 6. Now You Can Drive Off. It Will Take A Little Time For The Alternator To Charge The Battery Fully, So Don't Stop The Engine Again Too Soon And Try Not To Stall It While Driving! Note; To Reduce The Risk Of Vehicle Damage Or Battery Explosion Before Use ,please Read The Instruction Carefully Before Use
  • Color : Multicolour
  • In the Box : 1 Set of Jumper cable
  • Warranty : 1 Month
  • Material : Copper

Related Products

© 2016 Sparkinstrument.com . All rights reserved | Design by ITS Gwalior.