Fluke 106 Palm-sized Digital Multimeter

Product Code: Fluke106Palm-sizedDigitalMultimeter55

Quantity :

  • Availability : in stock
  • 3600
  • 3900
  • You saving : 300
Colour :

About this item

The Fluke 106 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you.

  • Voltage, resistance, continuity, capacitance
  • Input terminal for ac and dc current measurements to 10 A and current
  • Data hold

  • Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits])


    Accuracy Specifications
    FunctionRangeResolutionAccuracy
    AC Volts16.000 V
    60.00 V
    600.0 V
    0.001 V
    0.01 V
    0.1 V
    1.0 % + 3
    DC Volts6.000 V
    60.00 V
    600.0 V
    0.001 V
    0.01 V
    0.1 V
    0.5 % + 3
    AC Millivolts600.0 mV0.1 mV3.0 % + 3
    Diode Test22.000 V0.001 V10 %
    Resistance 
    (Ohms)
    400.0 O
    4.000 kO
    40.00 kO
    400.0 kO
    4.000 MO
    40.00 MO
    0.1 O
    0.001 kO
    0.01 kO
    0.1 kO
    0.001 MO
    0.01 MO
    0.5 % + 3
    0.5 % + 2
    0.5 % + 2
    0.5 % + 2
    0.5 % + 2
    1.5% + 3
    Capacitance350.00 nF
    500.0 nF
    5.000 µF
    50.00 µF
    500.0 µF
    1000 µF
    0.01 nF
    0.1 nF
    0.001 µF
    0.01 µF
    0.1 µF
    1 µF
    2 % + 5
    2 % + 5
    5 % + 5
    5 % + 5
    5 % + 5
    5 % + 5
    Frequency4 Hz
    (10 Hz – 100 kHz)
    50.00 Hz
    500.0 Hz
    5.000 kHz
    50.00 kHz
    100.0 kHz
    0.01 Hz
    0.1 Hz
    0.001 kHz
    0.01 kHz
    0.1 kHz
    NA
    Duty Cycle41 % to 99 %0.1 %NA
    AC Current
    (40 Hz to 200 Hz)
    4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5 % + 3
    DC Current4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5 % + 3
    1. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
    2. Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
    3. Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
    4. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
    FunctionOverload ProtectionInput Impedance (Nominal)Common Mode Rejection RatioNormal Mode Rejection Ratio
    AC Volts600 V 1>10 MO <100 pF 2>60 dB at dc,
    50 Hz or 60 Hz
    -
    AC Millivolts600 mV>1M, <100 pF>80 dB at 50 Hz or 60 Hz-
    DC Volts600 V 1>10 MO <100 pF>100 dB at dc,
    50 Hz or 60 Hz
    >60 dB at 50 Hz or 60 Hz
    1. 6 x 105 V Hz Max
    2. For mV (AC), input impedance is approximately 1 MO.
General Specifications
Maximum Voltage Between any Terminal and Earth Ground600 V
Display (LCD)6000 counts, updates 3/sec
Battery Type2 AAA, NEDA 24A, IEC LR03
Battery Life200 hours minimum
Temperature
Operating0 °C to 40 °C
Storage-30 °C to 60 °C
Relative Humidity
Operating HumidityNon-condensing when <10°C
≤90 % at 10 °C to 30 °C; ≤75 % at 30 °C to 40 °C
Operating Humidity, 40 MΩ Range≤80 % at 10 °C to 30 °C; ≤70 % at 30 °C to 40 °C
Altitude
Operating2000 m
Storage12,000 m
Temperature Coefficient0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Fuse Protection for Current Inputs11A, 1000V Fast Fuse, Fluke specified part only
Size (HxWxL)142 mm x 69 mm x 28mm
Weight200 g
IP RatingIEC 60529: IP 40
SafetyIEC 61010-1: 600 V CAT III, Pollution Degree 2
Electromagnetic EnvironmentIEC 61326-1: Portable
Electromagnetic CompatibilityApplies to use the Korea only.  Class A Equipment (Industrial Broadcasting and Communication Equipment)1
  1. This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

Related Products

© 2016 Sparkinstrument.com . All rights reserved | Design by ITS Gwalior.